Heavy Duty Digital Shaker, 25 mm orbit, 23 kg capacity
Details
The Ohaus 23 kg Capacity Digital Heavy Duty Shaker is designed for a wide range of applications with larger or heavier loads that require accurate and repeatable results. The shaking systems continuously monitors shaking speed and maintains the set-point even when changing loads. The microprocessor control provides consistent uniform shaking while safely ramping to the set speed. The shaker will automatically restart and display last set-point if power is interrupted. Touchpad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. There is a built in load sensor that will detect unbalanced conditions and with automatically reduce rpm to a safe speed.
Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques
Display: Independent LED displays for speed/time allow the operator to view both settings simultaneously and control knobs with dial markings (analog models)
Operation: Detachable 3-wire cord and plug (included)
Communication: RS232 interface provides two-way communication for data logging and unit control (digital models)
Construction: Cold rolled steel (CRS)
Design Features: Built-in tray (11 x 13 inch or 28 x 33 cm) with a non-slip rubber mat (included)
Specifications:
Motion: Orbital, 25 mm
Capacity: 22.7 kg
Speed Range: 20 rpm – 500 rpm
Tray Size (L x W): 18 x 24 in (45.7 x 61 cm)
Control: Digital
Drive System: Brushless DC Motor; Triple Eccentric
Calibration: Speed calibration
Communication: RS232 (Included)
Dimensions (H x L x W): 5.9 x 24 x 26.7 in (14.9 x 61 x 67.8 cm)
Net Weight: 108 lb (49 kg)
Orbit: 1 in (25 mm)
Power: 120V, 5A, 50/60Hz
Power Consumption: 75 W
Safety Certification: TUV
Speed Accuracy: ±1 rpm, Above 100 rpm ±1% of set speed
Speed Range: 20 rpm – 500 rpm
Timer: 1 second – 160 hours
Tray Construction: Aluminum
Working Environment: 14°F – 140°F, 80%RH, non-condensing (-10°C – 60°C, 80%RH, non-condensing)
Product Documents:
Product Datasheet
Product Manual
Product Guide
Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques
Display: Independent LED displays for speed/time allow the operator to view both settings simultaneously and control knobs with dial markings (analog models)
Operation: Detachable 3-wire cord and plug (included)
Communication: RS232 interface provides two-way communication for data logging and unit control (digital models)
Construction: Cold rolled steel (CRS)
Design Features: Built-in tray (11 x 13 inch or 28 x 33 cm) with a non-slip rubber mat (included)
Specifications:
Motion: Orbital, 25 mm
Capacity: 22.7 kg
Speed Range: 20 rpm – 500 rpm
Tray Size (L x W): 18 x 24 in (45.7 x 61 cm)
Control: Digital
Drive System: Brushless DC Motor; Triple Eccentric
Calibration: Speed calibration
Communication: RS232 (Included)
Dimensions (H x L x W): 5.9 x 24 x 26.7 in (14.9 x 61 x 67.8 cm)
Net Weight: 108 lb (49 kg)
Orbit: 1 in (25 mm)
Power: 120V, 5A, 50/60Hz
Power Consumption: 75 W
Safety Certification: TUV
Speed Accuracy: ±1 rpm, Above 100 rpm ±1% of set speed
Speed Range: 20 rpm – 500 rpm
Timer: 1 second – 160 hours
Tray Construction: Aluminum
Working Environment: 14°F – 140°F, 80%RH, non-condensing (-10°C – 60°C, 80%RH, non-condensing)
Product Documents:
Product Datasheet
Product Manual
Product Guide
Ratings & Reviews
No reviews available
Be the first to Write a Review