The Z446 universal centrifuge series offers the highest capacity of any bench top model. With air-craft grade, premium alloy construction, the 4 x 750mL swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50mL, 68 x 15mL tubes, and up to 20 x micro-plates.
Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (RCF), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration/deceleration rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.
- Offers the highest capacity of any bench top model
- Air-craft grade, premium alloy construction
- Allows for instant rotor identification
- Easy to use front panel
- Rotor exchange is simple and requires less than one minute
- Backlit LCD display
Capacity: 4 x 750mL, 28 x 50mL, 68 x 15mL tubes, and 20 x micro-plates
Speed Range: 200 to 16,000 rpm
Max. RCF: 24,325 x g
Max Capacity: 4 x 750 mL
Temp Range: -20ºC to 40ºC
Dimensions: 28.7 x 26.4 x 15.4 in (72.9 x 67 x 39.1 cm)
Timer: up to 99 hr, 59 min. and cont.
Weight: 244 lbs
Electrical: 115V, 60Hz